|
To
order by phone:
(801) 374-6214 To order by fax: (801) 374-0634 To order by email. or for questions: Click here Site produced and Administered by International Library Service. All right reserved. Copyright 1998-2002. Direct comments to: International Library Service P.O. Box 735 Provo, Utah 84603 U.S.A. |
RENCON
This new edition of Edward G. Nawy's highly acclaimed work reflects the very latest ACI 318-05 Building Code and includes these major changes and additions: * All design examples conform to the Strain Limits Design Method, using the applicable load factors and strength reduction factors. * An updated chapter on seismic design of buildings to comply with the major changes in the ACI 318 Code, and the new International Building Code provisions (IBC 2000-2003) on seismic design. The chapter has several additional new examples on confinement, frames, and shear wall design. * A chapter on LRFD design of bridge deck structures in accordance with AASHTO 2003 * An expanded section with new examples on the strut-and-tie modeling for the design of reinforced concrete deep beams and corbels, with extensive design examples using the ACI 318-05 appendix provisions for this method. * A comprehensive chapter on concrete materials and design of concrete mixtures for normal strength and high-strength, high-performance concretes, as well as provisions for environmental structures. A self-contained textbook, it can be used for a one-semester undergraduate level course and a one-semester graduate level course in reinforced concrete in standard civil engineering programs. It is equally useful for the practicing engineer. It is the only book that closely and systematically uses and follows procedures in numerous flowcharts within each chapter that simplify the understanding and application of the subject in design. This edition provides thorough coverage of short- and long-term material behavior, design of concrete mixtures, reliability and structural safety, serviceability behavior of beams and two-way slabs and plates, torsion and shear, design of two-way structural slab and plate systems, continuity in concrete structures, LRFD design of bridge decks, and seismic design of high-rise buildings in earthquake zones. The book includes an appendix of monograms and tables using the new load factors, strength reduction factors, and limit strains design procedures mandated by the new ACI 318-05 code. Comprehensive sketches and sets of working drawings, end-of-chapter problems, pictures of actual structural tests to failure, and flowcharts appear throughout the book. 4/13/05 Contents: 1. Introduction 2. Concrete-Producing Materials 3. Concrete 4. Reinforced Concrete 5. Flexure in Beams 6. Shear and Diagonal Tension in Beams 7. Torsion 8. Serviceability of Beams and One-Way Slabs 9. Combined Compression and Bending: Columns 10. Bond Development of Reinforcing Bars 11. Design of Two-Way Slabs and Plates 12. Footings 13. Continuous Reinforced Concrete Structures 14. Introduction to Prestressed Concrete 15. AASHTO LRFD Design of Concrete Bridge Structures 16. Seismic Design of Concrete Structures Appendix A: Tables and Nomograms Index |
ACI
|