SP-115
Reference Manual: Specifications for Masonry Structures ACI 530.1-92/ASCE 6-92/TMS 602.92, with selected ASTM References
1992, 293 pp.
$161.50

If you design or build with masonry construction, the new Reference Manual: Specifications for Masonry Structures, which includes the new Specifications for Masonry Structures (ACI 530.1-92/ASCE 6-92/TMS 602.92), will prove to be an unparalleled reference source.

ACI 530.1-92/ASCE 6-92/TMS 602.92 covers the minimum construction requirements for masonry structures. Included is the latest state-of-the-art information on: materials; the placing, bonding, and anchoring of masonry; the placement of grout and of reinforcement. Also covered extensively are: quality assurance, determination of compressive strength and metal accessories. The new SP-115 (92) reference manual is also a compilation of selected current ASTM standards and references listed in the specification, including concrete and clay building brick; sampling and testing brick and structural clay tile; hollow load-bearing concrete masonry; grout for masonry; pre-faced concrete and calcium silicate masonry; sampling and testing concrete masonry; strength anchors in concrete and masonry elements; standard specification for mortar; standard test method for drying shrinkage of concrete block; and the standard specification for prefabricated masonry panels. New in SP-115 (92), are Standard Specifications for Tolerances for Concrete Construction and Materials, (ACI 117-90), Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products (ASTM A 123-89a) and Standard Specification for Carbon Steel Bolts and Studs, 60,000 psi Tensile Strength (ASTM A 307-89).

Contents:
Reference Manual: Specifications for Masonry Structures ACI 530.1-92/ASCE 6-92/TMS 602.92, With ASTM References contains 53 papers:

*ACI 530.1-92/ASTM 6-92/TMS 602-92: Specifications for

Masonry Structures

*ACI 117-90: Standard Specifications for Tolerances for

Concrete Construction and Materials

*ASTM A 36-90: Standard Specification for Structural Steel

*ASTM A 82-90a: Standard Specification for Steel Wire,

Plan, for Concrete Reinforcement

*ASTM A 123-89a: Standard Specification for Zinc

(Hot-Dip Galvanized) on Iron and Steel Products

*ASTM A 153-82 (Reapproved 1987): Standard Specification

for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

*ASTM A 167-90: Standard Specification for Stainless and

Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

*ASTM A 185-90a: Standard Specification for Steel Welded

Wire Fabric, Plain, for Concrete Reinforcement

*ASTM A 307-89: Standards Specification for Carbon Steel

Bolts and Studs, 60,000 psi Tensile Strength

*ASTM A 366-85: Standard Specification for Steel, Sheet,

Carbon, Cold-Rolled, Commercial Quality

*ASTM A 496-90a: Standard Specification for Steel Wire,

Deformed, for Concrete Reinforcement

*ASTM A 497-90a: Standard Specification for Steel

Welded Wire Fabric Deformed, for Concrete Reinforcement

*ASTM A 525-90: Standard Specification for General

Requirements for Steel Sheet, Zinc-Coated (Galvanized)

by the Hot-Dip Process

*ASTM A 615-90: Standard Specification for Deformed

and Plain Billet-Steel Bars for Concrete Reinforcement

*ASTM A 616-90: Standard Specification for Rail-Steel

Deformed and Plain Bars for Concrete Reinforcement

*ASTM A 617-90: Standard Specification for Axle-Steel

Deformed and Plain Bars for Concrete Reinforcement

*ASTM A 641-89: Standard Specification for Zinc-Coated

(Galvanized) Carbon Steel Wire

*ASTM A 706-90: Standard Specification for Low-Alloy

Steel Deformed Bars for Concrete Reinforcement

*ASTM C 34-84: (Reapproved 1990): Standard Specification

for Structural Clay Loading-Bearing Wall Tile

*ASTM C 55-85: Standard Specification for Concrete

Building Brick

*ASTM C 56-71 (Reapproved 1986): Standard Specification

for Structural Clay Non-Load-Bearing Tile

*ASTM C 62-89a: Standard Specification for Building Brick

(Solid Masonry Units Made form Clay or Shale)

*ASTM C 67-90a: Standard Specification of Sampling and

Testing Brick and Structural Clay Tile

*ASTM C 73-85 (Reapproved 1989): Standard Specification

for Calcium Silicate Face Brick (Sand-Lime Brick)

*ASTM C 90-90: Standard Specification for Load-Bearing

Concrete Masonry Units

*ASTM C 97-90: Standard Test Methods for Absorption and

Bulk Specific Gravity of Dimension Stone

*ASTM C 99-87: Standard Test Method for Modulus of Rupture

of Dimension Stone

*ASTM C 120-90: Standard Methods of Flexure Testing of Slate

(Modulus of Rupture, Modulus of Elasticity)

*ASTM C 121-90: Standard Test Method for Water Absorption

of Slate

*ASTM C 126-86: Standard Specification for Ceramic Glazed

Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

*ASTM C 129-85 (Reapproved 1990): Standard Specification

for Non-Load-Bearing Concrete Masonry Units

*ASTM C 140-90: Standard Methods of Sampling and Testing

Concrete Masonry Units

*ASTM C 170-90: Standard Test Method for Compressive

Strength of Dimension Stone

*ASTM C 212-60 (Reapproved 1986): Standard Specification

for Structural Clay Facing Tile

*ASTM C 216-90a: Standard Specification for Facing Brick

(Solid Masonry Units Made from Clay or Shale)

*ASTM C 270-89: Standard Specification for Mortar

for Unit Masonry

*ASTM C 476-83: Standard Specification for Grout for Masonry

*ASTM C 503-89: Standard Specification for Marble Dimension

Stone (Exterior)

*ASTM C 568-89: Standard Specification for Limestone

Dimension Stone

*ASTM C 615-85: Standard Specification for Granite Dimension

Stone

*ASTM C 616-89: Standard Specification for Quartz-Based

Dimension Stone

*ASTM C 629-89: Standard Specification for Slate Dimension

Stone

*ASTM C 652-89a: Standard Specification for Hollow Brick

(Hollow Masonry Units Made from Clay or Shale)

*ASTM C 744-73 (Reapproved 1985): Standard Specification

for Prefaced Concrete and Calcium Silicate Masonry Units

*ASTM C 780-91: Standard Test Method for Preconstruction

and Construction Evaluation of Mortars for Plain and Reinforced

Unit Masonry

*ASTM C 901-85 (Reapproved 1990): Standard Specification

for Prefabricated Masonry Panels

*ASTM C 920-87: Standard Specification for Elastomeric

Joint Sealants

*ASTM C 1019-89a: Standard Method of Sampling and

Testing Grout

*ASTM D 994-71 (Reapproved 1982): Standard Specification

for Preformed Expansion Joint Filler for Concrete

(Bituminous Type)

*ASTM D 1056-85: Standard Specification for Flexible Cellular

Materials --Sponge or Expanded Rubber

*ASTM D 2000-86: Standard Classification System for

Rubber Products in Automotive Applications

*ASTM D 2287-81 (Reapproved 1989): Standard Specification

for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and

Extrusion Compounds

*ASTM E 447-84 (Reapproved 1991): Standard Test Methods

for Compressive Strength of Masonry Prisms