SP-149
Conference Singapore, 1994
American Ceramic Society, 1994, 844 pp.
$95.50

The theme of this second ACI International Conference was high-performance concrete. The conference proceedings title "High-Performance Concrete" contains 45 papers presented at this program. Whether you are currently involved with or are considering the use of high-performance concrete, this special symposium document is a must for you. Use the valuable information found in the above titles as well as the other listed in this special document.

Contents:
*THE UNITED STATES GOVERNMENT'S ROLE IN HIGH-

PERFORMANCE MATERIALS FOR INFRASTRUCTURE

by T.J. Pasko, Jr. and G.J. Frohnsdorff

*EFFECTS OF PHYSICAL AND CHEMICAL TREATMENTS

OF SILICA FUME ON THE STRENGTH AND

MICROSTRUCTURES OF MORTAR by S. Nagataki,

N. Otsuki, and M. Hisada

*PRODUCTION OF HIGH-STRENGTH CONCRETE FOR

THE HIBERNIA OFFSHORE CONCRETE PLATFORM by

G.C. Hoff, R. Walum, R. Elimov, and H.R. Woodhead

*CONCRETE TECHNOLOGY, THE KEY TO CURRENT

CONCRETE PLATFORM CONCEPTS by A.K. Haug

*MODIFIED NORMAL DENSITY (MND) CONCRETE FOR

THE TROLL GBS PLATFORM by M. Sandvik, T. Hovda,

and S. Smeplass

*INFLUENCE OF SILICA FUME AND POLYMER DISPERSIONS

IN HIGH-PERFORMANCE CONCRETE ON THE RESISTANCE

TO AGGRESSIVE CHEMICALS by U. Wiens, C. Alfes, and

P. Schiessl

*SULFATE RESISTANCE AND CHLORIDE PENETRATION

CHARACTERISTICS OF HIGH -STRENGTH CONCRETE by

W.A. Al-Khaja, W.A. Rasheeduzzafar, M.H. Al-Sayed, and

A.A. Al-Khoder

*IGH-PERFORMANCE CONCRETE USING BLENDED AND

TRIPLE BLENDED BINDERS by P. Fidjestol and J. Frearson

*ENGINEERING PROPERTIES OF HIGH-PERFORMANCE

CONCRETES CONTAINING BLAST FURNACE SLAG UNDER

`IN SITU' MOISTURE AND TEMPERATURE CONDITIONS by

S.L. Mak and A. Lu

*HIGH-PERFORMANCE CONCRETE INCORPORATING

LARGE VOLUMES OF ASTM CLASS F FLY ASH, by

A. Bilodeau and V.M. Malhotra

*HIGH-STRENGTH RC BEAM-COLUMN JOINTS UNDER

LARGE REVERSAL LOADS by D. Galeota, M.M. Giammatteo,

and R. Marino

*BEHAVIOR OF THE COMPRESSED ZONE OF REINFORCED

AND PRESTRESSED HIGH -STRENGTH CONCRETE BEAMS

by H. Manalip, M. Pinglot, and M. Lorrain

*SHEAR CAPACITY OF STEEL FIBER HIGH-STRENGTH

CONCRETE BEAMS by M. Imam, L. Vandewalle, and

F. Mortelmans

*HIGH-PERFORMANCE CONCRETE: LOW-HEAT AND

HIGH-STRENGTH by K. Sakai and H. Watanabe

*PROPERTIES OF HIGH-STRENGTH CONCRETE

SUBJECTED TO UNIAXIAL LOADING by N. Han and

J.C. Walraven

*A METHOD OF REPAIRING CONCRETE SLABS USING

HIGH-PERFORMANCE CONCRETE by N. Maruyama, M. Yurugi,

H. Konishi, and Y. Murahashi

*SHEAR FRICTION IN HIGH-STRENGTH CONCRETE by

J. Walraven and J. Stroband

*THE DUCTILE BEHAVIOR OF BEAM-COLUMN JOINTS WITH

HIGH-AND LOW-STRENGTH CONCRETE by S.W. Shin, J.M. Ahn,

K.S. Lee, S.H. Lee, and S.K. Ghosh

*DEVELOPMENT AND PRODUCTION OF HIGH-PERFORMANCE

CONCRETE by M.R. Hansen, M.L. Leming, P. Zia, and S.H. Ahmad

*HIGH-PERFORMANCE AUSTRALIAN CONCRETES

FOR MARINE APPLICATIONS by D. Baweja, V. Sirivivatnanon,

W. Gross, and G. Laurie

*HIGH-PERFORMANCE CONCRETE COLUMNS by

N.A. Lloyd and B.V. Rangan

*HIGH-STRENGTH CONCRETE COLUMNS WITH

LONGITUDINAL REINFORCEMENT OF MIXED STEEL

GRADES by H. Tanaka, Y. Sato, R. Park, and N. Kani

*SINGLE-SPAN, CONTINUOUS, AND SLENDER DEEP BEAMS

MADE OF HIGH-STRENGTH CONCRETE by F.K. Kong, S. Teng,

P.P. Maimba, K.H. Tan, and L.W. Guan

*EFFECT OF AXIAL LOAD RATIO AND STIRRUPS VOLUME

RATIO ON DUCTILITY OF HIGH STRENGTH CONCRETE

COLUMNS by Q. Wang, G. Zhao, and L. Lin

*ROLES OF SILICA FUME, SLAG, AND FLY ASH IN THE

DEVELOPMENT OF HIGH PERFORMANCE CONCRETE

MICROSTRUCTURE by S.L. Sarkar

*MECHANICAL AND DURABILITY-RELATED PROPERTIES

OF HIGH-STRENGTH CONCRETE CONTAINING SILICA FUME

by K. Torii and M. Kawamura

*MOISTURE-INDUCED VOLUME CHANGES IN HIGH-STRENGTH

CONCRETE by R. Sri Ravindrarajah, C.M. Mercer, and J. Toth

*FRACTURE MECHANICS PARAMETERS INFLUENCING THE

MECHANICAL PROPERTIES OF HIGH PERFORMANCE

CONCRETE by K.M. Lee and O. Buyukozturk

*DEVELOPMENT LENGTH FOR STRAIGHT DEFORMED BARS

IN HIGH-STRENGTH CONCRETE by F.A. Al-Jahdali, F.F. Wafa,

and S.A. Shihata

*SHEAR BEHAVIOR OF FIBER-REINFORCED HPC DEEP BEAMS

by I.K. Fang and J.Y. Wu

*FREEZING AND THAWING: COMPARISON BETWEEN

NON-AIR-ENTRAINED AND AIR -ENTRAINED HIGH-STRENGTH

CONCRETE by Y. Li, B.W. Langan, and M.A. Ward

*EFFECTS OF SILICA FUME ON CREEP AND SHRINKAGE

OF STEEL FIBER-REINFORCED CONCRETE by J.C. Chern

and C.Y. Chang

*ROLE OF EXPANSIVE ADMIXTURES IN HIGH-PERFORMANCE

CONCRETE by C. Enyi and L. Huizhen

*EFFECTS OF TESTING VARIABLES ON THE STRENGTH

OF HIGH-STRENGTH (90 Mpa) CONCRETE CYLINDERS

by N.J. Carino, W.F. Guthrie, E.S. Lagergren, and G.M. Mullings

*CONTROLLING THE CONSISTENCY OF HIGH-

PERFORMANCE CONCRETE BY MIXING TORQUE IN

THE READY-MIXED CONCRETE PLANT by N. Nishiyama

*ADIABATIC TEMPERATURE RISE IN CONCRETE WITH

AND WITHOUT GGBFS by C.T. Tam, Y.H. Loo, and K.F. Choong

*THE DRY-MIX/STEAM-INJECTION METHOD FOR

PRODUCING HIGH-STRENGTH CONCRETE IN ONE DAY

by T.D. Lin

*EFFECT OF CONCRETE STRENGTH ON BOND BEHAVIOR

UNDER IMPACT LOADING by C. Yan and S. Mindess

*INFLUENCE OF AGGREGATE PROPERTIES ON

FRACTURE ENERGY OF HIGH-STRENGTH CONCRETE

by S. Nakamura, Y. Kitsutaka, and K. Kamimura

*EVALUATION OF AGGREGATE PROPERTIES ON TENSION

SOFTENING BEHAVIOR OF HIGH STRENGTH CONCRETE

by Y. Kitsutaka, K. Kamimura, and S. Nakamura

*EFFECTIVENESS OF SUPPLEMENTARY CEMENTING

MATERIALS IN REDUCING EXPANSION DUE TO ALKALI-

AGGREGATE REACTION IN HIGH-PERFORMANCE CONCRETE

by B. Fournier and V.M. Malhotra

*STRENGTHENING MECHANISMS OF HIGH-PERFORMANCE

CONCRETE by W. Jiang and D.M. Roy

*HIGH-STRENGTH CONCRETE FOR HIGH-RISE TOWERS by

C.T. Thornton, H. Mohamad, U. Hungspruke, and L. Joseph

*OBSERVATIONS ON THE FATIGUE BEHAVIOR OF HIGH-

STRENGTH LIGHTWEIGHT CONCRETE by G.C. Hoff

*LESSONS LEARNED FROM FIELD TRIALS WITH HIGH-

PERFORMANCE CONCRETE by J.J. Schemmel, M.L.

Leming, and M.R. Hansen