SEARCH NORMAS!

Key words or numbers

To order by phone:
(801) 374-6214

To order by fax:
(801) 374-0634

To order by email.
or for questions:

Click here


[ Home ]



Site produced and administered by
International Library Service.
Copyright 1998-2000.
All rights reserved.
Direct comments to:

International Library Service
P.O. Box 735
Provo, Utah 84603

SP-179
Advances in Concrete Technology

Fourth CANMET/ACI/JCI Conference: 1998, 1109 pp.

$72.50


This Symposium Publication contains the proceedings of the Fourth CANMET/ACI/JCI International Conference held in Tokushima, Japan, in June 1998. Sixty-two refereed papers were accepted for presentation at this conference and for this publication.

Contents:
*Preface by V.M. Malhotra

*Some Durability Considerations in the Design of the

Confederation Bridge by W.S. Langley, G. Forbes &

E. Tromposch

*High Volume Wastes Concrete (HVWC) by H. Uchikawa,

S. Hanehara & H. Hirao

*New Applications of Magnesium Phosphate Cements by

J. Pera & J. Ambroise

*Cracking Tendency of High Strength Lightweight Aggregate

Concrete at Early Ages by T.A. Hammer, O. Bjontegaard

& E.J. Sellevold

*Properties of High-Strength & High-Fluidity Lightweight

Concrete by K. Fujii, S. Adachi, M. Takeuchi, M. Kakizaki,

H. Edahiro, T. Inoue & Y. Yamamoto

*Rapid Testing Methods For Segregation Resistance &

Filling Ability of Self-Compacting Concrete by B.K. Van,

D.G. Montgomery, I. Hinczak & K. Turner

*Mechanical Properties, Drying, Shrinkage & Resistance

to Freezing & Thawing of Concrete Using recycled

Aggregate by T. Yamato, Y. Emoto & M. Soeda

*Properties & Application of Environmentally Friendly

Porous Concrete by M. Tamai & T. Matsukawa

*Properties & Performance of green Concrete by

K. Yanagibashi & T. Yonezawa

*Strength & Durability of Concrete Using Bottom Ash

as Replacement for Fine Aggregate by T. Bakoshi,

K. Kohno, S. Kawasaki & N. Yamaji

*Properties of High-Strength Poroud Concrete by

H. Fujiwara, R. Tomita, T. Okamoto, A. Dozono &

A. Obatake

*Shrinkage Reduction Type of Advanced Superplasticizer

by T. Sugiyama, A. Ohta & Y. Tanaka

*Experimental Investigation on Shrinkage & Creep of

High Strength Concrete at Early Ages by Y. Yang, M. Xu,

R. Sato & M. Tezuka

*Use of Water-Repellent Admixture to Improve Concrete

Performance by M. Shoya, S. Sugita, Y. Tsukinaga, M. Aba

& M. Ohba

*New Superplasticizers Based on Modified Melamine

Polymer by I. Torresan & R. Khurana

*Water Control Properties of Silane Treatment by Y. Kubo,

A. Hattori, T. Miyagawa & K. Hori

*Influence of the Sulfate Level in the Clinker Phase on the

Performance of Superplasticized Concretes by L. Coppola,

R. Troli, P. Zaffaroni & M. Collepardi

*Influence of Desalination on Behavior of Prestressing Steel

by T. Ueda, A. Hattori, T. Miyagawa, M. Fujii, S. Mizoguchi

& M. Ashida

*Effects of Protective Methods Against Salt Damage

for New Prestressed Concrete Bridge by Y. Takizawa

*Carbonation, Amount of Chloride Ion, & Corrosion of Steel

of Reinforced Concrete Builsings in Hanshin Region by

Y. Ohno & Y. Yamamoto

*Study of the Penetrating Process of Chloride Ions Into

Concrete by Y. Yamada, T. Oshiro & Y. Masuda

*Relationship Between Neutralization Depth &

Concentration Distribution of CaCo3 - Ca(OH)2 in

Carbonated Concrete by T. Fukushima, Y. Yoshizaki,

F. Tomosawa & K. Takahashi

*Application of High-Strength Concrete to Fill Tubular

Steel Columns by S. Kuroiwa, K. Kuroha, M. Hayakawa,

& K. Watanabe

*High-Performance Lightweight Concrete for the Precast

Prestressed Concrete Industry by F. Curcio, D. Galeota,

A. Gallo & M. Giammatteo

*Mixture Proportions of High-Strength & High-Fluidity

Lightweight Concrete by K. Fujii, M. Kakizaki, H. Edahiro,

Y. Unisuga & Y. Yamamoto

*High-Performance Concrete Mixture Proportioning by

K.G. Sobolev & S.V. Soboleva

*Punching Shear Resistance of High Strength Concrete

Flat Slabs Reinforced With Steel Fibers & Transverse

Reinforcement by J.B. DeHanai, & E.N. Zambrana Vargas

*Fireproof Concrete For Lining of Soak Pits by S.I.

Pavlenko, A.A. Permyakov & Yu N. Pronyakin

*Thermal Properties of High Strength Concrete at

Elevated Temperatures by V.K.R. Kodur & M. Sultan

*Basic Study on the New Testing Method of Judging the

Saturated Surface Dry Condition of Fine Aggregates

by A. Ueno, K. Kokubu & H. Ohga

*Method of Measuring Moisture Content in Concrete

With Small Stainless Steel Electrodes by N. Yuasa,

Y. Kasai & I. Matsui

*Application of Infrared Thermography Technique for

Evaluation of Cracks in Concrete Structures by

S. Nagataki, T. Kamada & A. Matsumoto

*Petrographic Diagnosis of Alkali-Aggregate Reaction

in Concrete Based on Quantitative EPMA Analysis

by T. Katayama

*Determination of the Apparent Activation Energy of

Concrete: Ea. Semi-Adiabatic Tests of Heat Development

by L. D'Aloia & G. Chanvillard

*Accelerated Testing of Chloride Diffusivity in Cement

Based Materials: New Test Operating Mode by A.B.

Ammar, J.M. Loche & P. Dumargue

*Effects of Specimen Preparation on the Properties of

Fresh & Hardened High Fluidity Concretes by H.

Tanenaka, M. Kakizaki, Y. Abe & M. Okada

*Self-Compacting Concrete With High-Volume Crushed

Rock Fines by A. Nishio, H. Tamura & M. Ohashi

*Study on Subsidence & Shrinkage of Super-Workable

Concrete by T. Ogasawara, H. Naito, T. Miura, T. Abe

& R. Ohmura

*Study on the Shrinkage Crack Resistance of Self-

Compacting Concrete by A. Yasumoto, Y. Edamatsu,

M. Mizukoshi & S. Nagaoka

*Shrinkage & Crack Propagation of Flowing Concrete

at Early Ages by S. Hiraishi, K. yokoyama & Y. Kasai

*Experimental Evaluation & Theoretical Simulation of

Self Compacting Concrete by the Modified Distinct

Element Method (MDEM) by H. Chu & A. Machida

*Investigation on Durability of High-Volume Fly Ash

Concrete by N. Kawaguchi, K. Kohno, Y. Kurose &

T. Bakoshi

*Evaluation of the Setting Shrinkage of MMA Polymer

Concrete by A. Kawamura, M. Kuromoto & T. Iwai

*Studies of Polymer Cement Mortar for use as Permanent

Forms by K. Horii, T. Tsutsuzaki & K. Kohno

*Developments in Automated Production Application

Systems for Polymer Concrete by D. Van Gemert &

K.U. Leuven

*Performance of Solid Concrete Pavers Under Freeze-

Thaw & Deicing Salt Environments of Newly Adopted

ASTM C 1262 Test Method by N. Ghafoori & S. Kassel

*Freezing & Thawing Resistance of Lightweight Aggregate

Concrete by E. Fujiki, K. Kokubu, T. Hosaka, T. Umehara

& N. Talaha

*Effects of Curing Methods in Cold regions on Strength of

Concrete Incorporating Ground Granulated Blast Furnace

Slag by T. Miura & I. Iwaki

*Effectiveness of Partially Cooling System for Massive

Concrete Structures by M. Eto, K. maruyama & S. Ono

*Effect of Curing Temperature on the Strength &

Performance Properties of Concrete by J.G. Cabrera

& B.A. Gaafar

*FEM Pressure Estimation of Confined Expansive

Concrete by K. Yamada, T. Harada, K. Soeda &

A. Watanabe

*Porous Concrete for Underwater Organisms in a

River by K. Sakai, K. Shindoh & M. Atohda

*Study on Delayed Deformation of an Ultra High

Strength Cementitious Material by A. Loukili, P.

Richard & J. Lamirault

*Study on Wood Chip Concrete With Used Timber

by Y. Kasai, M. Kawamura & J.D. Zhou

*New Accelerated Leaching Experiment: The Lift

Procedure by J. le Marechal, B. Gerard, J. Marchand,

J. Ph. Gagnon & O. Didry

*Effects of Placement Interval of High-Fluidity Concretes

by K. Fujii, T. Kemi, G. Shimizu, M. Sakuta & Y. Unisuga

*Pull-Out behavior of High Yield Strength Steel Deformed

Bars Embedded in High Strength Concrete by M. Lorrain

& O. Maurel

*Advances in Evaluation of Lignosulphonates as Concrete

Admixtures by J. Zhor & T.W. Bremner

*Effect of Temperature & Relative Humidity on Concrete

Creep & Shrinkage by K. Sakata & T. Ayano

*Freezing & Thawing Resistance of High Slag Content

Concrete J. Nakamoto, K. Togawa, T. Miyagawa, M. Fujii

& S. Nagaoka

*Application of Recycled Concrete for Structural Concrete:

Experimental Study on the Quality of Recycled Aggregate

& Recycled Aggregate Concrete by Y. Dosho, M. kikuchi,

M. Narikawa, A. Ohshima, A. Koyama & T. Miura

*Convention Factors

*Index

ACI