|
To
order by phone:
(801) 374-6214 To order by fax: (801) 374-0634 To order by email. or for questions: Click here
|
SP-180
During the ACI 1997 Spring Convention, ACI Committee 408, Bond and Development of Reinforcement, organized four sessions intending to assess the state of the art in bond research, practical applications, and code development. The sessions were organized into a symposium honoring Dr. Peter Gergely, a longtime member of Committee 408, who had recently passed away. Contents: Structures, by S.L. McCabe and S.J. Pantazopoulou *Bond and Splitting: A Vexing Question, by P.G. Gambarova, G.P. Rosati and C.E. Schumm *Contribution of Concrete Between Cracks At Inelastic Steel Strains and Conclusions For The Optimization Of Bond, by R. Eligehausen, J. Ozbolt and U. Mayer *A Dilatational-Interface Model For Bond, by J.V. Cox *Tension Stiffening and Cracking Behavior In High-Strength Concrete, by G. Creazza, R. DiMarco and E. Siviero *Bond Under Repeated Loading, by G.L. Balazs *Confinement Role Of Prestressing Strand, by J.A. den Uijl *Bond Of Ribbed Bars Modeled Through Concrete Confinement, by E. Giuriani and G.A. Plizzari *Pull-Out Bond Behavior Of Ribbed Bars In Normal And High-Strength Concrete With Various Confinements, by B. Engstrom, J. Magnusson and Z. Huang *Preventing Brittle Failure Of Tension Splices In High-Strength Concrete, by A. Azizinamini *Bond Of Epoxy-Coated Reinforcement In Normal And High-Strength Concrete, by T. Grundhoffer, P.A. Mendis, C.W. French and R. Leon *Overview Of Research To Improve The Development Characteristics Of Reinforcing Bars, by D. Darwin, J. Zuo and M.L. Tholen *Bond Slip Of Bridge Column Reinforcement Anchored In Cap Beams, by S. Sritharan, J.M. Ingham, M.J.N. Priestley and F. Seible *Pullout Of Horizontial Reinforcement Embedded In Masonry, by E. Vintzileou and N. Psilla *Effects Of Transverse Reinforcement And Bonded Length On The Side-Blowout Capacity Of Headed Reinforcement, by R.A. DeVries, J.O. Jirsa And T. Bashandy *Performance Of Concrete Bridge Decks And Slabs Reinforced With Epoxy-Coated Steel Under Repeated Loading, by H.O. Hasan, D.B. Cleary and J.A. Ramirez *Design recommendations For Epoxy-Coated Reinforcement, by J. Cairns, J.O.Jirsa and S.L. McCabe *Fundamental Analysis Of RC Lap Splices, by T. Ichinose, T. Hayashi and W. Lin *Bond Properties Of High-Strength Fiber Reinforced Concrete, by B. Aarup and B.C. Jensen *Bond Studies Of Reinforcing Bars In Silica Fume Concrete, by B.S. Hamad and M.S. Itani *Bond Of FRP Reinforcement In Concrete: A State- Of-The-Art In Preparation, by R. Repfers |
ACI
|