|
To
order by phone:
(801) 374-6214 To order by fax: (801) 374-0634 To order by email. or for questions: Click here. Site
produced and administered by |
ASME
Standards on Elevators and Escalators
(Safety codes and standards for the design, construction, installation, operation, inspection, testing, maintenance, alteration, and repair of elevators, dumbwaiters, escalators, moving walks, material lifts and dumbwaiters with automatic transfer devices, wheelchair lifts, and inclined-stairway chairlifts.) A17.1-2004 This Code of safety standards covers the design, construction, operation, inspection, testing, maintenance, alteration, and repair of the following equipment, its associated parts, and its hoistways, where located in or adjacent to a building or structure (except as modified by para. 1.2): (a) hoisting and lowering mechanisms, equipped with a car or platform, which move between two or more landings. This equipment includes, but is not limited to, elevators; (b) power driven stairways and walkways for carrying persons between landings. This equipment includes, but is not limited to escalators and moving walks; (c) hoisting and lowering mechanisms equipped with a car which serves two or more landings and is restricted to the carrying of material by its limited size or limited access to the car. This equipment includes, but is not limited to, dumbwaiters and material lifts. This Code applies to new installations only, except Part 1, and 5.10, 8.1, 8.6, 8.7, 8.9, 8.10, and 8.11, which apply to both new and existing installations. "The advancement of technologies used in the design and construction of elevator equipment has enabled the installation of the equipment in other than traditional locations such as machine rooms." ISBN #: 0791828662 STANDARDS QUICK FIND A13, A17, A18.18.1, A18.1, A90, A112, A120, AG, B1, B4, B5, B16, B17, B18 CU, B18 M, B20, B27.6, B27.7, B27.8M, B29, B30, B31, B32, B36, B40, B46, B47, B73, B89, B94, B107, BPE, BTH, CSD, HPS, HST, MFC, MH1, N278, N509, N510, NOG, NQA, NUM, OM, PALD, PCC, PTC, PVHO, QAI, QEI, QFO, QHO, QME, QMO, QRO, RA-S, RTP, SI, STS,TDP, Y14, Y32, |
|