ASME Standards on Fasteners - Customary Units
Click here for Metric Units

B18.1.1 - 1972 (R2006) - Small Solid Rivets
B18.1.2 - 1972 (R2006) - Large Rivets
B18.2.1 - 1996 (R2005) - Square and Hex Bolts and Screws
B18.2.2 - 1987 (R2005) - Square and Hex Nuts
B18.2.6 - 2006 - Fasteners for Use in Structural Applications
B18.2.8 - 1999 (R2005) - Clearance Holes for Bolts, Screws, and Studs
B18.3 - 2003 - Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys
B18.5 - 1990 (R2003) - Round Head Bolts
B18.6.1 - 1981 (R1997) - Wood Screws
B18.6.2 - 1998 (R2005) - Slotted Head Cap Screws, Square Head Set and Slotted Headless Set Screws
B18.6.3 - 2003 - Machine Screws and Machine Screw Nuts
B18.6.4 - 1999 (R2005) - Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws
B18.8.1 - 1994 (R2005) - Clevis Pins and Cotter Pins
B18.8.2 - 2000 (R2005) - Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins
B18.9 - 2007 - Plow Bolts
B18.10 - 2006 - Track Bolts and Nuts
B18.11 - 1961 (R2005) - Miniature Screws
B18.13 - 1996 (R2003) - Screw and Washer Assemblies - Sems
B18.15 - 1985 (R2003) - Forged Eyebolts
B18.21.1 - 1999 (R2005) - Lock Washers (Inch Series)
B18.22.2 - 1965 (R2003) - Plain Washers
B18.24 - 2004 - Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
B18.29.1 - 1993 (R2002) - Helical Coil Screw Thread Inserts: Free Running and Screw Locking
B18.27 - 1999 - Tapered and Reduced Cross Section Retaining Rings (Inch Series)
B27.6 - 1972 (R1999) - General Purpose Uniform Cross Section Spiral Retaining Rings