(801) 374-6214
To order by fax:
(801) 374-0634
To order by email.
or for questions:
Click here
Site
produced and administered by
International Library Service.
Copyright 1998-2000.
All rights reserved.
Direct comments to:
International Library Service
P.O. Box 735
Provo, Utah 84603
ASME
Measurement Standards
(Standards for dimensional
metrology and calibration of instruments.)
B89.1.9-2002
Gage Blocks
$45.00
This Standard specifies the most important design and metrological characteristics of gage blocks with a rectangular or square cross-section and a nominal length ln ranging from 0.5 mm to 1000 mm for metric sizes and 0.0010 in. to 40 in. for inch sizes. It is not the intent of this Standard to preclude the use, by contractual agreement, of gage blocks of other shapes, grades or materials. Limit deviations and tolerances are stated for the calibration Grade K and for the Grades 00, 0 , AS-1, and AS-2 for various measuring purposes.
ISBN #: 0791827534
Published: 2002
Product Type: Print-Book
No. of pages: 46
STANDARDS QUICK FIND
A13, A17, A18.18.1, A18.1, A90, A112, A120, AG, B1, B4, B5, B16, B17, B18 CU, B18 M, B20, B27.6, B27.7, B27.8M, B29, B30, B31, B32, B36, B40, B46, B47, B73, B89, B94, B107, BPE, BTH, CSD, HPS, HST, MFC, MH1, N278, N509, N510, NOG, NQA, NUM, OM, PALD, PCC, PTC, PVHO, QAI, QEI, QFO, QHO, QME, QMO, QRO, RA-S, RTP, SI, STS,TDP, Y14, Y32,
The latest
codes,
standards,
and related
publications
available from
ASME.
Click
here
for the
Boiler & Pressure Vessel
Code