ASTM Book of Standards (Print and CD-ROM)
Volume 01.06, February 2006
Coated Steel Products

Table of Contents


A0090_A0090M-01 Test Method for Weight \[Mass\] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A0111-99AR04E01 Specification for Zinc-Coated (Galvanized) |P`Iron|P' Telephone and Telegraph Line Wire
A0116-05 Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
A0121-99R04 Specification for Metallic-Coated Carbon Steel Barbed Wire
A0123_A0123M-02 Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A0143_A0143M-03 Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A0153_A0153M-05 Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A0239-95R04 Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A0308_A0308M-03 Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A0309-01 Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A0363-03 Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A0384_A0384M-02 Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A0385-05 Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A0390-95R01 Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A0392-03 Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A0411-03 Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A0428_A0428M-01 Test Method for Weight \[Mass\] of Coating on Aluminum-Coated Iron or Steel Articles
A0459-97R03 Specification for Zinc-Coated Flat Steel Armoring Tape
A0460-94R04E01 Specification for Copper-Clad Steel Wire Strand
A0463_A0463M-05 Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A0474-03 Specification for Aluminum-Coated Steel Wire Strand
A0475-03 Specification for Zinc-Coated Steel Wire Strand
A0491-03 Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A0586-04A Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A0591_A0591M Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight \[Mass\] Applications
A0599_A0599M-02 Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A0603-98R03 Specification for Zinc-Coated Steel Structural Wire Rope
A0623-05 Specification for Tin Mill Products, General Requirements
A0623M-03 Specification for Tin Mill Products, General Requirements \[Metric\]
A0624_A0624M-03 Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A0625_A0625M-03 Specification for Tin Mill Products, Black Plate, Single-Reduced
A0626_A0626M-03 Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A0630-03 Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A0640-97R02E01 Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A0641_A0641M-03 Specification for Zinc\NCoated (Galvanized) Carbon Steel Wire
A0650_A0650M-03 Specification for Tin Mill Products, Black Plate, Double Reduced
A0653_A0653M-05A Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A0657_A0657M-03 Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A0740-98R03 Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A0741-98R03 Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
A0742_A0742M-03 Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A0754_A0754M-96R04 Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A0755_A0755M-03 Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A0760_A0760M-01A Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A0761_A0761M-04 Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A0762_A0762M-00 Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A0780-01 Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A0792_A0792M-05 Specification for Steel Sheet, 55 \% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A0796_A0796M-04A Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A0798_A0798M-01 Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A0807_A0807M-02E01 Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A0809-03 Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A0810-01 Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A0817-03 Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A0818-91R01 Specification for Coppered Carbon Steel Wire
A0824-01 Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A0849-00R05 Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A0854_A0854M-98R03 Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A0855_A0855M-03 Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A0856_A0856M-03 Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A0862_A0862M-98R03 Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A0875_A0875M-05 Specification for Steel Sheet, Zinc-5 \% Aluminum Alloy-Coated by the Hot-Dip Process
A0879_A0879M-04 Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A0885_A0885M-96R02 Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
A0896-89R04 Practice for Conducting Case Studies on Galvanized Structures
A0902-05A Terminology Relating to Metallic Coated Steel Products
A0917-05 Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A0918-00R05 Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A0924_A0924M-04 Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A0925-03 Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A0926-03 Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A0929_A0929M-01 Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A0930-03 Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A0964_A0964M-03 Specification for Corrugated Steel Box Culverts
A0974-97R03 Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
A0975-97R03 Specification for Double\NTwisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic\NCoated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A0978_A0978M-97R02E01 Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A0979_A0979M-03 Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A0987-05 Test Method for Measuring Shape Characteristics of Tin Mill Products
A0998_A0998M-98R03 Practice for Structural Design of Reinforcements for Fittings in Factory\NMade Corrugated Steel Pipe for Sewers and Other Applications
A1003_A1003M-05 Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1004_A1004M-99R04 Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
A1019_A1019M-01 Specification for Closed Rib Steel Pipe with Diameter of 36 in. \[900 mm\] or Less, Polymer Precoated for Sewers and Drains
A1030_A1030M-05 Practice for Measuring Flatness Characteristics of Steel Sheet Products
A1042_A1042M-04 Specification for Composite Corrugated Steel Pipe for Sewers and Drains
F0537-01 Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
F0552-02 Terminology Relating to Chain Link Fencing
F0567-00 Practice for Installation of Chain-Link Fence
F0626-96AR03 Specification for Fence Fittings
F0654-03 Specification for Residential Chain Link Fence Gates
F0668-04 Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
F0761 Specification for Strength Requirements of Tubular Steel Posts and Rails for Residential Chain-Link Fence
F0900-05 Specification for Industrial and Commercial Swing Gates
F0934-96R03 Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
F0964-02 Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
F0969-01 Practice for Construction of Chain-Link Tennis Court Fence
F1043-04 Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
F1083-04 Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F1183-96R02 Specification for Aluminum Alloy Chain Link Fence Fabric
F1184-05 Specification for Industrial and Commercial Horizontal Slide Gates
F1345-96R03 Specification for Zinc-5\t\% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F1379-95R03 Terminology Relating to Barbed Tape
F1553-01 Guide for Specifying Industrial and Commercial Chain Link Fence
F1664-01 Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
F1665-01 Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1712-02 Specification for Steel Chain-Link Fencing Materials Used in Detention and Correctional Facilities
F1908-98 Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F1910-98R03 Specification for Long Barbed Tape Obstacles
F1911-05 Practice for Installation of Barbed Tape
F1999-00 Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
F2000-00A Guide for Fences for Ballfields and Other Sports Facilities
F2049-03 Guide for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
F2200-05 Specification for Automated Vehicular Gate Construction
F2408-04 Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
F2453_F2453M-05 Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in. \[3871 mm\] or Less, in Panels or Rolls, with Uniform Meshes