The handbook is the companion volume to DIN Handbook 141 and DIN Handbook 15 and has been updated to reflect the current state of standardization. It includes 56 standards, 12 of which are new international standards.
| DIN 267-2 |
Fasteners; technical delivery conditions; design and dimensional accuracy |
English Translation |
| DIN 267-13 |
Fasteners; technical specifications; parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C |
English Translation |
| DIN 267-29 |
Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C |
English Translation |
| DIN 931-2 |
M 42 to M 160 × 6 hexagon head bolts; product grade B |
English Translation |
| DIN 976-1 |
Stud bolts - Part 1: Metric thread |
English Translation |
| DIN 2509 |
Double end studs |
English Translation |
| DIN 2510-1 |
Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation |
English Translation |
| DIN 2510-2 |
Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits |
English Translation |
| DIN 2510-3 |
Bolted Connections with Reduced Shank; Stud-bolts |
English Translation |
| DIN 2510-4 |
Bolted Connections with Reduced Shank; Studs |
English Translation |
| DIN 2510-5 |
Bolted Connections with Reduced Shank; Hexagon Nuts |
English Translation |
| DIN 2510-6 |
Bolted Connections with Reduced Shank; Cap Nuts |
English Translation |
| DIN 2510-7 |
Bolted Connections with Reduced Shank; Extension Sleeves |
English Translation |
| DIN 3567 |
Pipe Brackets for NW 20 to 500 |
English Translation |
| DIN 3570 |
Steel Strap for Tubes of NW 20 to 500 |
English Translation |
| DIN 4279-4 |
Testing of Pressure Pipelines for Water by Internal Pressure; Steel Pipes with and without Bitumen Lining |
English Translation |
| DIN 4279-9 |
Testing of Pressure Pipelines for Water by Internal Pressure; Specimen Pages for Test Reports |
English Translation |
| DIN 28090-2 |
Static gaskets for flange connections - Part 2: Gaskets made from sheets; special test procedures for quality assurance |
English Translation |
| DIN 28090-3 |
Static gaskets for flange connections - Part 3: Gaskets made from sheets; chemical resistance test procedures |
English Translation |
| DIN 28091-1 |
Technical delivery conditions for gasket sheets - Part 1: Gasket materials; general requirements |
English Translation |
| DIN 28091-2 |
Technical delivery conditions for gasket sheets - Part 2: Fibre-based gasket materials (FA); requirements and testing |
English Translation |
| DIN 28091-3 |
Technical delivery conditions for gasket sheets - Part 3: PTFE-based gasket materials (TF); requirements and testing |
English Translation |
| DIN 28091-4 |
Technical delivery conditions for gasket sheets - Part 4: Expanded graphite-based gasket materials (GR); requirements and testing |
English Translation |
| DIN 30670 |
Polyethylen coatings of steel pipes and fittings; requirements and testing |
English Translation |
| DIN 30672 |
External organic coatings for the corrosion protection of buried and immersed pipelines for continuous operating temperatures up to 50 °C - Tapes and shrinkable materials |
English Translation |
| DIN 30673 |
Bitumen coatings and linings for steel pipes, fittings and vessels |
English Translation |
| DIN 50115 |
Notched bar impact testing of metallic materials using test pieces other than ISO test pieces |
English Translation |
| DIN 50125 |
Testing of metallic materials - Tensile test pieces |
English Translation |
| DIN EN 1515-1 |
Flanges and their joints - Bolting - Part 1: Selection of bolting |
English Translation |
| DIN EN 1515-2 |
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
English Translation |
| DIN EN 10002-1 |
nsile testing of metallic materials; method of test at ambient temperature |
English Translation |
| DIN EN 10045-1 |
Charpy impact test on metallic materials; part 1: test method |
English Translation |
| DIN EN 10204 |
Metallic products - Types of inspection documents |
English Translation |
| DIN EN 10226-1 |
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
English Translation |
| DIN EN 10268 |
Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials |
English Translation |
| DIN EN 10284 |
Non-destructive testing - Eddy current testing - General principles and basic guidelines |
English Translation |
| DIN EN 12266-1 |
Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
English Translation |
| DIN EN 12266-2 |
Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements |
English Translation |
| DIN EN 13555 |
Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
English Translation |
| DIN EN 14772 |
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
English Translation |
| DIN EN 20898-2 |
Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread |
English Translation |
| DIN EN ISO 898-1 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs |
English Translation |
| DIN EN ISO 3269 |
Fasteners - Acceptance inspection |
English Translation |
| DIN EN ISO 3506-1 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs |
English Translation |
| DIN EN ISO 3506-2 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts |
English Translation |
| DIN EN ISO 4014 |
Hexagon head bolts - Product grades A and B |
English Translation |
| DIN EN ISO 4032 |
Hexagon nuts, style 1 - Product grades A and B |
English Translation |
| DIN EN ISO 4042 |
Fasteners - Electroplated coatings |
English Translation |
| DIN EN ISO 8492 |
Metallic materials - Tube - Flattening test |
English Translation |
| DIN EN ISO 8493 |
Metallic materials - Tube - Drift-expanding test |
English Translation |
| DIN EN ISO 8494 |
Metallic materials - Tube - Flanging test |
English Translation |
| DIN EN ISO 8495 |
Metallic materials - Tube - Ring-expanding test |
English Translation |
| DIN EN ISO 8496 |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B |
English Translation |
| DIN EN ISO 8673 |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B |
English Translation |
| DIN EN ISO 8674 |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B |
English Translation |
