This volume, DIN Handbook 15/4, contains standards for use in the design and construction of pipework previously contained in DIN Handbook 141, some as revisions. Also now included is the DIN EN ISO 4126 series on safety devices for protection against excessive pressure. The addition of these standards addressing safety issues makes this handbook an indispensable reference guide for piping engineers and designers.
| DIN 1986-4 |
Drainage systems on private ground - Part 4: Fields of application of sewage pipes and fittings of different materials |
English translation |
| DIN 1988-1 |
Drinking water supply systems; general (DVGW code of practice) |
English translation |
| DIN 1988-2 |
Drinking water supply systems; materials, components, appliances, design and installation (DVGW code of practice) |
English translation |
| DIN 1988-3 |
Drinking water supply systems; pipe sizing (DVGW code of practice) |
English translation |
| DIN 1988-5 |
Drinking water supply systems; pressure boosting and reduction (DVGW code of practice) |
English translation |
| DIN 2403 |
Identification of pipelines according to the fluid conveyed |
English translation |
| DIN 2429-1 |
Symbolic representation of pipework components for use on engineering drawings; basic requirements |
English translation |
| DIN 2429-2 |
Symbolic representation of pipework components on engineering drawings; functional representation |
English translation |
| DIN 2429-2 Beiblatt 1 |
Symbolic representation of pipework components on technical drawings; functional representation; examples for the representation of open or shut-off flow |
English translation |
| DIN 2916 |
Bending Radii for Seamless and Welded Steel Tubes; Design Sheet |
English translation |
| DIN 3202-4 |
Face-to-face and centre-to-face dimensions of valves; Valves with female thread connection |
English translation |
| DIN 3202-5 |
Face-to-face and centre-to-face dimensions of valves; valves for connection with compression couplings |
English translation |
| DIN EN 805 |
Water supply - Requirements for systems and components outside buildings |
English translation |
| DIN EN 12056-2 |
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
English translation |
| DIN EN 12056-3 |
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
English translation |
| DIN EN 12056-4 |
Gravity drainage systems inside buildings - Part 4: Wastewater lifting plants, layout and calculation |
English translation |
| DIN EN ISO 4126-1 |
Safety devices for protection against excessive pressure - Part 1: Safety valves |
English translation |
| DIN EN ISO 4126-2 |
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices |
English translation |
| DIN EN ISO 4126-2 Berichtigung 1 |
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices |
English translation |
| DIN EN ISO 4126-3 |
Safety devices for protection against exessive pressure - Part 3: Safety valves and bursting disc safety devices in combination |
English translation |
| DIN EN ISO 4126-4 |
Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves |
English translation |
| DIN EN ISO 4126-5 |
Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) |
English translation |
| DIN EN ISO 4126-6 |
Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices |
English translation |
| DIN EN ISO 4126-7 |
Safety devices for protection against excessive pressure - Part 7: Common data (ISO/DIS 4126-7:2009) |
English translation |
| DIN EN ISO 6708 |
Pipework components - Definition and selection of DN (nominal size) |
English translation |
| ISO 2768-1 |
General tolerances; tolerances for linear and angular dimensions without individual tolerance indications |
English translation |
