The handbook contains 37 essential standards on fasteners, covering such areas as countersinks and counterbores, widths across flats, thread run-outs, bolt and screw ends, stud ends and tapped holes for compression couplings, driving features, tolerance for screw threads and nomenclature.
| DIN 66 |
Countersinks for countersunk head screws with ISO 7721 common head style |
English Translation |
| DIN 74 |
Countersinks for countersunk head screws except countersunk head screws with heads according to DIN EN 27721 |
English Translation |
| DIN 76-1 |
Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1 |
English Translation |
| DIN 76-2 |
Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1 |
English Translation |
| DIN 78 |
Protrusions of bolt ends |
English Translation |
| DIN 202 |
Screw threads - General plan |
English Translation |
| DIN 475-1 |
Widths across flats for bolts, screws, valves and fittings |
English Translation |
| DIN 918 |
Fasteners; Terminology; Spelling of terms; Abbreviations |
English Translation |
| DIN 918 Beiblatt 3 |
Fasteners - European Standards - Survey |
English Translation |
| DIN 962 |
Bolts, screws, studs and nuts - Designation, types and finishes |
English Translation |
| DIN 974-1 |
Diameters of counterbores for hexagon socket head cap screws and screws with cheese head or pan head; manufacturing dimensions |
English Translation |
| DIN 974-2 |
Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions |
English Translation |
| DIN 2510-2 |
Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits |
English Translation |
| DIN 2510-8 |
Bolted Connections with Reduced Shank; Threaded Holes for Studs |
English Translation |
| DIN 7500-2 |
Thread rolling screws for ISO metric thread; guideline values for hole diameters |
English Translation |
| DIN 7975 |
Tapping screw connections; guideline values for core hole diameters and use |
English Translation |
| DIN 7998 |
Threads and Thread Ends for Wood Screws |
English Translation |
| DIN 8140-1 |
Wire thread inserts for ISO metric screw threads - Part 1: Dimensions, technical specifications |
English Translation |
| DIN 34803 |
Split pin holes and wire holes for bolts, screws and studs |
English Translation |
| DIN EN 20225 |
Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning |
English Translation |
| DIN EN 20273 |
Fasteners; clearance holes for bolts and screws |
English Translation |
| DIN EN 27721 |
Countersunk head screws; head configuration and gauging |
English Translation |
| DIN EN ISO 1478 |
Tapping screw thread |
English Translation |
| DIN EN ISO 4753 |
Fasteners - Ends of parts with external metric ISO thread |
English Translation |
| DIN EN ISO 4757 |
Cross recesses for screws |
English Translation |
| DIN EN ISO 10664 |
Hexalobular internal driving feature for bolts and screws |
English Translation |
| DIN EN ISO 23429 |
Gauging of hexagon sockets |
English Translation |
| DIN ISO 261 |
ISO general purpose metric screw threads - General plan |
English Translation |
| DIN ISO 262 |
ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts |
English Translation |
| DIN ISO 885 |
General purpose bolts and screws - Metric series - Radii under the head |
English Translation |
| DIN ISO 965-1 |
ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data |
English Translation |
| DIN ISO 965-2 |
ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality |
English Translation |
| DIN ISO 965-3 |
ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads |
English Translation |
| DIN ISO 965-4 |
ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
English Translation |
| DIN ISO 965-5 |
ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
English Translation |
| ISO 272 |
Fasteners; Hexagon products; Widths across flats |
French Translation |
| ISO 1891 |
Fasteners - Terminology |
Original in English |
