The handbook contains 95 product standards for fasteners without threads, such as pins, rivets, keys, adjusting and retaining rings, as well as new international standards on blind rivets.
| DIN 101 |
Rivets - Technical specifications |
English translation |
| DIN 124 |
Steel round head rivets with nominal diameters from 10 to 36 mm |
English translation |
| DIN 258 |
Taper Pins - With thread ends and constant taper lengths |
English translation |
| DIN 268 |
Tangential Keys and Tangential Keyways for Alternating Shock Loads |
English translation |
| DIN 271 |
Tangential Keys and Tangential Keyways for Constant Loads |
English translation |
| DIN 302 |
Countersunk head rivets; nominal diameters 10 to 36 mm |
English translation |
| DIN 471 |
Retaining rings for shafts - Normal type and heavy type |
English translation |
| DIN 472 |
Circlips (retaining rings) for bores; Normal type and heavy type |
English translation |
| DIN 660 |
Round head rivets; nominal diameters 1 to 8 mm |
English translation |
| DIN 661 |
Countersunk head rivets; nominal diameters 1 to 8 mm |
English translation |
| DIN 662 |
Mushroom head rivets; nominal diameters 1,6 to 6 mm |
English translation |
| DIN 674 |
Flat round head rivets; nominal diameters 1,4 to 6 mm |
English translation |
| DIN 675 |
Flat countersunk head rivets; nominal diameters 3 to 5 mm |
English translation |
| DIN 918 |
Fasteners; Terminology; Spelling of terms; Abbreviations |
English translation |
| DIN 983 |
Retaining rings with lugs for shafts |
English translation |
| DIN 984 |
Spring retaining rings with lugs for use in bores (internal circlips) |
English translation |
| DIN 988 |
Shim rings and supporting rings |
English translation |
| DIN 1143-1 |
Nails for use in automatic nailing machines |
English translation |
| DIN 1157 |
Tin tacks |
English translation |
| DIN 1158 |
Hook nails |
English translation |
| DIN 1163 |
Molding pins |
English translation |
| DIN 1445 |
Clevis pins - With head and threaded portion |
English translation |
| DIN 1469 |
Grooved pins, half length grooved with gorge |
English translation |
| DIN 6434 |
Rivet sets |
English translation |
| DIN 6791 |
Semi-tubular pan head rivets; nominal diameters 1,6 to 10 mm |
English translation |
| DIN 6792 |
Semi-tubular countersunk head rivets; nominal diameters 1,6 to 10 mm |
English translation |
| DIN 6799 |
Retaining washers for shafts |
English translation |
| DIN 6880 |
Bright Key Steel - Dimensions, tolerances, mass |
English translation |
| DIN 6881 |
Taper Key Torque Transmission; Saddle Keys, Dimensions and Application |
English translation |
| DIN 6883 |
Taper Key Torque Transmission; Parallel Keys, Dimensions and Application |
English translation |
| DIN 6884 |
Taper Key Torque Transmission; Gib-head Parallel Keys, Dimensions and Application |
English translation |
| DIN 6885-1 |
Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern |
English translation |
| DIN 6885-2 |
Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern for Machine Tools, Dimensions and Application |
English translation |
| DIN 6885-3 |
Drive Type Fastenings without Taper Action; Parallel Keys, Shallow Pattern, Dimensions and Application |
English translation |
| DIN 6886 |
Stressed-type Fastenings with Taper Action; Taper Keys, Keyways, Dimensions and Application |
English translation |
| DIN 6887 |
Stressed-type Fastenings with Taper Action; Taper Keys with Gip Head, Keyways, Dimensions and Application |
English translation |
| DIN 6888 |
Drive Type Fastenings without Taper Action; Woodruff Keys, Dimensions and Application |
English translation |
| DIN 6889 |
Taper Key Torque Transmission; Gib-head Saddle Keys, Dimensions and Application |
English translation |
| DIN 7331 |
Compression rivets |
English translation |
| DIN 7338 |
Rivets for brake linings and clutch linings |
English translation |
| DIN 7339 |
Tubular rivets (one piece) drawn from strip |
English translation |
| DIN 7340 |
Tubular rivets cut from the tube |
English translation |
| DIN 7341 |
Rivet Pins |
English translation |
| DIN 7349 |
Plain washers for bolts with heavy clamping sleeves |
English translation |
| DIN 7993 |
Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores |
English translation |
| DIN 11024 |
Spring Cotters |
English translation |
| DIN 18182-4 |
Accessories for use with gypsum plasterboards; nails |
English translation |
| DIN 68163 |
Fasteners for assembling timber pallets; nails |
English translation |
| DIN EN 10230-1 |
Steel wire nails - Part 1: Loose nails for general applications |
English translation |
| DIN EN 22339 |
Unhardened taper pins |
English translation |
| DIN EN 22340 |
Clevis pins without head |
English translation |
| DIN EN 22341 |
Clevis pins with head |
English translation |
| DIN EN 28736 |
Unhardened taper pins with internal thread |
English translation |
| DIN EN 28737 |
Unhardened taper pins with external thread |
English translation |
| DIN EN 28738 |
Plain washers for clevis pins; product grade |
English translation |
| DIN EN 28738 |
Plain washers for clevis pins; product grade |
English translation |
| DIN EN 28749 |
Determination of shear strength of pins |
English translation |
| DIN EN ISO 1234 |
Split pins |
English translation |
| DIN EN ISO 2338 |
Parallel pins of unhardened steel and austenitic stainless steel |
English translation |
| DIN EN ISO 2338 |
Parallel pins of unhardened steel and austenitic stainless steel |
English translation |
| DIN EN ISO 3269 |
Fasteners - Acceptance inspection |
English translation |
| DIN EN ISO 8733 |
Parallel pins with internal thread, of unhardened and austenitic stainless steel |
English translation |
| DIN EN ISO 8734 |
Parallel pins of hardened and martensitic stainless steel |
English translation |
| DIN EN ISO 8735 |
Parallel pins with internal thread, of hardened and martensitic stainless steel |
English translation |
| DIN EN ISO 8739 |
Grooved pins - Full-length parallel grooved, with pilot |
English translation |
| DIN EN ISO 8740 |
Grooved pins - Full-length parallel grooved, with chamfer |
English translation |
| DIN EN ISO 8741 |
Grooved pins - Half-length reverse-taper grooved |
English translation |
| DIN EN ISO 8742 |
Grooved pins - One-third-length centre grooved |
English translation |
| DIN EN ISO 8743 |
Grooved pins - Half-length centre grooved |
English translation |
| DIN EN ISO 8744 |
Grooved pins - Full-length taper grooved |
English translation |
| DIN EN ISO 8745 |
Grooved pins - Half-length taper grooved |
English translation |
| DIN EN ISO 8746 |
Grooved pins with round head |
English translation |
| DIN EN ISO 8747 |
Grooved pins with countersunk head |
English translation |
| DIN EN ISO 8748 |
Spring-type straight pins - Coiled, heavy duty |
English translation |
| DIN EN ISO 8750 |
Spring-type straight pins - Coiled, standard duty |
English translation |
| DIN EN ISO 8751 |
Spring-type straight pins - Coiled, light duty |
English translation |
| DIN EN ISO 8752 |
Spring-type straight pins - Slotted, heavy duty |
English translation |
| DIN EN ISO 13337 |
Spring-type straight pins - Slotted, light duty |
English translation |
| DIN EN ISO 14589 |
Blind rivets - Mechanical testing |
English translation |
| DIN EN ISO 15975 |
Closed end blind rivets with break pull mandrel and protruding head - Al/AlA |
English translation |
| DIN EN ISO 15976 |
Closed end blind rivets with break pull mandrel and protruding head - St/St |
English translation |
| DIN EN ISO 15977 |
Open end blind rivets with break pull mandrel and protruding head - AlA/St |
English translation |
| DIN EN ISO 15978 |
Open end blind rivets with break pull mandrel and countersunk head - AlA/St |
English translation |
| DIN EN ISO 15979 |
Open end blind rivets with break pull mandrel and protruding head - St/St |
English translation |
| DIN EN ISO 15980 |
Open end blind rivets with break pull mandrel and countersunk head - St/St |
English translation |
| DIN EN ISO 15981 |
Open end blind rivets with break pull mandrel and protruding head - AlA/AlA |
English translation |
| DIN EN ISO 15982 |
Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA |
English translation |
| DIN EN ISO 15983 |
Open end blind rivets with break pull mandrel and protruding head - A2/A2 |
English translation |
| DIN EN ISO 15984 |
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 |
English translation |
| DIN EN ISO 16582 |
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt |
English translation |
| DIN EN ISO 16583 |
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt |
English translation |
| DIN EN ISO 16584 |
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCi/SSt |
English translation |
| DIN EN ISO 16585 |
Closed end blind rivets with break pull mandrel and protruding head - A2/SSt |
English translation |
| ISO 2768-1 |
General tolerances; tolerances for linear and angular dimensions without individual tolerance indications |
English translation |
| ISO 2768-2 |
General tolerances; geometrical tolerances for features without individual tolerances indications |
English translation |
| ISO 14588 |
Blind rivets - Terminology and definitions |
English translation |
