This first edition of DIN Handbook 45 is a compilation of 79 standards on threads used in various technical fields. Most of the documents included here are fundamental standards on threads for general applications covering a wide range of thread types: ISO metric general purpose and trapezoidal screw threads, stub metric trapezoidal screw threads, round screw threads, buttress threads and pipe threads.
The handbook also includes numerous standards on threads for use in special applications such as optical engineering, automotive engineering, railway engineering, pipeline construction and packaging. Many of the standards included have international relevance. With ISO 5855-1 and LN 9163-1 the collection also contains two of the most important thread standards for the aerospace industry.
| DIN 13-1 |
ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm |
English Translation |
| DIN 13-2 |
ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm |
English Translation |
| DIN 13-3 |
ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm |
English Translation |
| DIN 13-4 |
ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm |
English Translation |
| DIN 13-5 |
ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm |
English Translation |
| DIN 13-6 |
ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm |
English Translation |
| DIN 13-7 |
ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm |
English Translation |
| DIN 13-8 |
ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm |
English Translation |
| DIN 13-9 |
ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm |
English Translation |
| DIN 13-10 |
ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm |
English Translation |
| DIN 13-11 |
ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm |
English Translation |
| DIN 13-19 |
ISO general purpose metric screw threads - Part 19: Nominal profiles |
English Translation |
| DIN 13-20 |
ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm |
English Translation |
| DIN 13-21 |
ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm |
English Translation |
| DIN 13-22 |
ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm |
English Translation |
| DIN 13-23 |
ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm |
English Translation |
| DIN 13-24 |
ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm |
English Translation |
| DIN 13-25 |
ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm |
English Translation |
| DIN 13-26 |
ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm |
English Translation |
| DIN 13-28 |
ISO Metric Screw Threads; Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles |
English Translation |
| DIN 13-50 |
ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads |
English Translation |
| DIN 13-51 |
ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes |
English Translation |
| DIN 13-52 |
ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile |
English Translation |
| DIN 76-1 |
Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1 |
English Translation |
| DIN 76-2 |
Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1 |
English Translation |
| DIN 76-3 |
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch |
English Translation |
| DIN 103-1 |
ISO Metric Trapezoidal Screw Thread; Profiles |
English Translation |
| DIN 103-2 |
ISO Metric Trapezoidal Screw Thread; General Plan |
English Translation |
| DIN 103-3 |
ISO Metric Trapezoidal Screw Thread; General Plan |
English Translation |
| DIN 103-4 |
ISO Metric Trapezoidal Screw Thread; Nominal Dimensions |
English Translation |
| DIN 103-5 |
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter |
English Translation |
| DIN 103-6 |
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter |
English Translation |
| DIN 103-7 |
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter |
English Translation |
| DIN 103-8 |
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter |
English Translation |
| DIN 158-1 |
Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification |
English Translation |
| DIN 168-1 |
Knuckle threads - Part 1: Especially for glass containers; thread sizes |
English Translation |
| DIN 202 |
Screw threads - General plan |
English Translation |
| DIN 262-1 |
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Nominal Dimensions |
English Translation |
| DIN 262-2 |
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges |
English Translation |
| DIN 264-1 |
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Nominal Dimensions |
English Translation |
| DIN 264-2 |
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges |
English Translation |
| DIN 380-1 |
Stub metric trapezoidal screw threads; thread profiles |
English Translation |
| DIN 380-2 |
Stub metric trapezoidal screw threads; general plan |
English Translation |
| DIN 405-1 |
General purpose knuckle threads - Part 1: Profiles, nominal sizes |
English Translation |
| DIN 405-2 |
General purpose knuckle threads - Part 2: Deviations and tolerances |
English Translation |
| DIN 513-1 |
Metric buttress threads; thread profiles |
English Translation |
| DIN 513-2 |
Metric buttress threads; general plan |
English Translation |
| DIN 513-3 |
Metric buttress threads; deviations and tolerances |
English Translation |
| DIN 2510-2 |
Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits |
English Translation |
| DIN 3858 |
Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions |
English Translation |
| DIN 6063-1 |
Screw threads used mainly for plastic containers - Part 1: Dimensions of buttress threads |
English Translation |
| DIN 6063-2 |
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions |
English Translation |
| DIN 7273-1 |
Knuckle Threads for Steel Sheet Pieces up to 0.5 mm Thickness and Appropriated Couplings; Dimensions, Tolerances |
English Translation |
| DIN 7756 |
Valves for Vehicle Tyres; Valve Screw Threads; Theoretical Values, Limiting Dimensions of Screw Threads |
English Translation |
| DIN 7998 |
Threads and Thread Ends for Wood Screws |
English Translation |
| DIN 8140-2 |
Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances |
English Translation |
| DIN 8141-1 |
ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes |
English Translation |
| DIN 15403 |
Lifting Hooks for Hoists; Knuckle Threads |
English Translation |
| DIN 30295-1 |
Rounded Trapezoidal Threads; Nominal Dimensions |
English Translation |
| DIN 30295-2 |
Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges |
English Translation |
| DIN 40430 |
Steel Conduit Thread; Dimensions |
English Translation |
| DIN EN 10226-1 |
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
English Translation |
| DIN EN 10226-2 |
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
English Translation |
| DIN EN ISO 228-1 |
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation |
English Translation |
| DIN EN ISO 228-1 Beiblatt 1 |
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size |
English Translation |
| DIN EN ISO 1478 |
Tapping screw thread |
English Translation |
| DIN ISO 68-1 |
ISO general purpose metric screw threads - Basic profil - Part 1: Metric screw threads |
English Translation |
| DIN ISO 261 |
ISO general purpose metric screw threads - General plan |
English Translation |
| DIN ISO 262 |
ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts |
English Translation |
| DIN ISO 724 |
ISO general purpose metric screw threads - Basic dimensions |
English Translation |
| DIN ISO 965-1 |
ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data |
English Translation |
| DIN ISO 965-2 |
ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality |
English Translation |
| DIN ISO 965-3 |
ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads |
English Translation |
| DIN ISO 965-4 |
ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
English Translation |
| DIN ISO 965-5 |
ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
English Translation |
| DIN ISO 8038-1 |
Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5 in x 1/36 in) |
English Translation |
| LN 9163-1 |
Aerospace; ISO Metric Threads; Basic deviations and tolerances |
English Translation |
| ISO 5855-1 |
Aerospace - MJ threads - Part 1: General requirements |
Original in English |
| ISO 6698 |
Cycles; screw threads used to assemble freewheels on bicycle hubs |
Original in English |
