The handbook contains 41 standards, dealing with technical delivery conditions for bolts, screws, nuts and washers. The standards cover mechanical and functional properties and their testing, as well as tolerances, acceptance testing and quality assurance.
| DIN 267-2 |
Fasteners; technical delivery conditions; design and dimensional accuracy |
English Translation |
| DIN 267-6 |
Fasteners and similar parts; technical specifications, finishes and tolerances for product grade F |
English Translation |
| DIN 267-13 |
Fasteners; technical specifications; parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C |
English Translation |
| DIN 267-24 |
Fasteners; technical delivery conditions; property classes for nuts (hardness classes) |
English Translation |
| DIN 267-26 |
Fasteners; technical delivery conditions; steel spring washers for bolt/nut assemblies |
English Translation |
| DIN 267-27 |
Fasteners - Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications |
English Translation |
| DIN 267-28 |
Fasteners - Part 28: Steel screws, bolts and studs with locking coating; Technical specifications |
English Translation |
| DIN 267-29 |
Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C |
English Translation |
| DIN 267-30 |
Fasteners - Technical delivery conditions - Part 30: Metric thread rolling screws of property class 10.9 |
English Translation |
| DIN 918 Beiblatt 3 |
Fasteners - European Standards - Survey |
English Translation |
| DIN 946 |
Determination of coefficient of friction of bolt/nut assemblies under specified conditions |
English Translation |
| DIN 969 |
Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results |
English Translation |
| DIN EN 20898-2 |
Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread |
English Translation |
| DIN EN 20898-7 |
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
English Translation |
| DIN EN 26157-1 |
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements |
English Translation |
| DIN EN 26157-3 |
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements |
English Translation |
| DIN EN 28839 |
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts |
English Translation |
| DIN EN ISO 898-1 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs |
English Translation |
| DIN EN ISO 898-5 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress |
English Translation |
| DIN EN ISO 898-6 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread |
English Translation |
| DIN EN ISO 2320 |
Prevailing torque type steel hexagon nuts - Mechanical and performance properties |
English Translation |
| DIN EN ISO 2702 |
Heat-treated steel tapping screws - Mechanical properties |
English Translation |
| DIN EN ISO 3269 |
Fasteners - Acceptance inspection |
English Translation |
| DIN EN ISO 3506-1 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs |
English Translation |
| DIN EN ISO 3506-2 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts |
English Translation |
| DIN EN ISO 3506-3 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress |
English Translation |
| DIN EN ISO 3506-4 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws |
English Translation |
| DIN EN ISO 4042 |
Fasteners - Electroplated coatings |
English Translation |
| DIN EN ISO 4759-1 |
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C |
English Translation |
| DIN EN ISO 4759-3 |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C |
English Translation |
| DIN EN ISO 6157-2 |
Fasteners - Surface discontinuities - Part 2: Nuts |
English Translation |
| DIN EN ISO 7085 |
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
English Translation |
| DIN EN ISO 10484 |
Widening test on nuts |
English Translation |
| DIN EN ISO 10485 |
Cone proof load test on nuts |
English Translation |
| DIN EN ISO 10666 |
Drilling screws with tapping screw thread - Mechanical und functional properties |
English Translation |
| DIN EN ISO 10683 |
Fasteners - Non-electrolytically applied zinc flake coatings |
English Translation |
| DIN EN ISO 15330 |
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method |
English Translation |
| DIN EN ISO 16048 |
Passivation of corrosion-resistant stainless-steel fasteners |
English Translation |
| DIN EN ISO 16426 |
Fasteners - Quality assurance system |
English Translation |
| ISO 8992 |
Fasteners - General requirements for bolts, screws, studs and nuts |
Original in English |
