| DIN 12480 |
Laboratory glassware - Three-neck bottles - Woulff bottles |
| DIN 16838 |
Thermoplastics materials for fittings - Polyphenylene sulfone (PPSU) - General quality requirements and testing |
| DIN 16839 |
Thermoplastics materials for fittings - Polysulfone (PSU) - General quality requirements and testing |
| DIN 16840 |
Thermoplastics materials for fittings - Polyvinylidene fluoride (PVDF) - General quality requirements and testing |
| DIN 28000-3 |
Chemical apparatus - Documentation in the life cycle of process plants - Part 3: Flow diagrams and plant identification codes |
| DIN 28006-1 |
Tolerances for agitator vessels - Part 1: Agitator vessels of metallic materials |
| DIN 28007-1 |
Tolerances for columns - Part 1: Columns of metallic materials |
| DIN 51480-1 |
Electrorheological suspensions - Requirements, testing and application - Part 1: Basics and field strength independent properties |
| DIN 51503-1 |
Lubricants - Refrigerator oils - Part 1: Specifications
|
| DIN 51626-1 |
Automotive fuels - Requirements and test methods -
Part 1: Petrol E10 and petrol E5 |
| DIN 53159 |
Paints and varnishes - Determination of the degree of chalking of paint coatings by the Kempf method |
| DIN 53504 |
Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test |
| DIN 55662 |
Paints and varnishes - Coatings for automotive industry - Testing of resistance to pressure-water jetting
|
| DIN 67510-1 |
Phosphorescent pigments and products - Part 1: Measurement and marking at the producer |
| DIN 68800-1 |
Wood preservation - Part 3: Preventive protection of wood with wood preservatives |
| DIN EN 116 |
Diesel and domestic heating fuels - Determination of cold filter plugging point; German version prEN 116:2009 |
| DIN EN 422 |
Plastics and rubber machines - Blow moulding machines - Safety requirements; German version EN 422:2009 |
