75.08 - Face-to-Face Dimensions for Flanged Clamp or Pinch Valves (ISA)

To order by phone:
(801) 374-6214

To order by fax:
(801) 374-0634

To order by email.
or for questions:
Click here

[ Home ] [ Up ]

Site produced and administered by
International Library Service.
Copyright 1998-2000.
All rights reserved.
Direct comments to:

International Library Service
P.O. Box 735
Provo, Utah 84603

75.08
ANSI/ISA-75.08-1999 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
softbound, 14pp.
$45.00

Aids users in their piping design by providing installed face-to-face dimensions for control valves, incorporating clamp or pinch elements, which have flanges that mate with ANSI B16.1 Class 125 (PN20) and/or ANSI B16.5 Class 125 (PN20) flanges, without giving special consideration to the manufacturer of the equipment to be used. This standard applies to clamp or pinch valves sizes 1 inch through 8 inches.

Scope:
This standard applies to valves, sizes 1 inch through 8 inches of the clamp or pinch valve design incorporating clamp or pinch elements.

Purpose:
The purpose of this standard is to aid users in their piping design by providing installed face-to-face dimensions for control valves, incorporating clamp or pinch elements, which have flanges that mate with ANSI B16.1 Class 125 (PN20) and/or ANSI B16.5 Class 150 (PN20) flanges, without giving special consideration to the manufacturer of the equipment to be used.

This standard excludes solenoid-actuated valves and direct fluid-actuated valves.

In the absence of other standards, this standard can be applied to handwheel-operated valves.