SEARCH
NORMAS!

Key words or numbers
To order by phone:
(801) 374-6214

To order by fax:
(801) 374-0634

To order by email.
or for questions:
Click here.
[ Home ]

Site produced and administered by
International Library Service.
Copyright 1998-2000.
All rights reserved.
Direct comments to:

International Library Service
P.O. Box 735
Provo, Utah 84603

NFPA 34(07)
Dipping and Coating Processes Using Flammable or Combustible Liquids
Softbound, 30 pp., 2007
$45.00

Promote industrial fire safety around electrical equipment and hazardous materials with NFPA 34.

NFPA 34 addresses dipping, roll coating, flow coating, and similar processes using flammable or combustible liquids. Parallel to the requirements in NFPA 33 for spray application, this documents provides rules for:

  • Proper location, design, and construction of dipping and coating equipment
  • Installation of electrical systems and control of ignition sources
  • Ventilation requirements
  • Handling of flammable liquids
  • Fire protection
  • Operations and maintenance

Major changes in the 2007 edition:

  • Provisions for hazardous location electrical utilization equipment and wiring have been revised to correlate with the 2005 NFPA 70: National Electrical Code®
  • New diagrams illustrate electrical area classification around open dipping and coating processes
  • Maximum quantities of flammable and combustible liquids revised for consistency with NFPA 30: Flammable and Combustible Liquids Code.
  • Protection requirements completely revised to correlate with the 2007 edition of NFPA 33: Spray Application Using Flammable or Combustible Materials, incorporating all necessary interlocks.
  • Added requirements address solvent recyclers.