The SAE Wheel Standards Manual, 2006 Edition (HS-3300-2006)
provides a comprehensive compilation of technical reports relating to
the design and dimensional characteristics, labeling and marking, nomenclature,
and testing of wheels and wheel-end hardware. These standards, Recommended
Practices and Information Reports have been developed by two groups within
SAE: the Wheel Standards Committee and the Truck and Bus Wheel Subcommittee.
This manual also includes some SAE documents that have been developed
by other committees for easy reference.
SAE Standards are listed by topic in Appendix A and a breakdown of
truck and passenger car documents is included in Appendix B.
SAE Standards Included:
-
R J175 SEP2003 Wheels - Impact Test Procedure- Road
Vehicles
-
R J179 JUL2001 Labeling - Disc Wheels and Demountable
Rims - Trucks
-
J267 MAR1999 Wheels/Rims - Trucks - Performance Requirements
and Test Procedures
-
R J328 FEB2005 Wheels - Passenger Car and Light Truck
Performance Requirements and Test procedures
-
J393 JUL2001 Nomenclature - Wheels, Hubs, and Rims
for Commercial Vehicles
-
J429JAN1999 Mechanical and Material Requirements
for Externally Threaded Fasteners
-
J694FEB2001 Disc Wheel/Hub or Drum Interface Dimensions-
Commercial Vehicles
-
J851 JUL2001 Dimensions - Wheels for Demountable
Rims, Demountable Rims, and Spacer Bands- Commercial Vehicles
-
J876 APR2000 Wide Base Disc Wheels and Demountable
Rims
-
J995 JUL1999 Mechanical and Material Requirements
for Steel Nuts
-
R J1095 MAR2003 Spoke Wheels and Hub Fatigue Test
Procedures
-
J1102 FEB1995 Mechanical and Material Requirements
for Wheel Bolts
-
J1102M MAR2001 Mechanical and Material Requirements
for Metric Wheel Bolts
-
J1199 MAR2001 Mechanical and Material Requirements
for Metric Externally Threaded Steel Fasteners
-
J1204 JUN1997 Wheels - Recreational and Utility Trailer
Test Procedures
-
J1671 JUN1997 Outboard Mounted Brake Drum/Disc Wheel
Hub Interface Dimensions - Commercial Vehicles
-
R J1730 JUL2004 ABS Excitor Ring Location Standardization
-
R J1835 MAY2004 Fastener Hardware for Wheels for
Demountable Rims
-
R J1842 NOV2004 Disc Wheel Hub/Spoke Wheel and Axle
Interface Dimensions- Commercial Vehicles
-
J1865 JUN1999 Dimensional Compatibility for Commercial
Vehicles Fitment of Complete Wheels
-
R J1965 JUN2003 Road Vehicles - Wheels for Commercial
Vehicles and Multipurpose Passenger Vehicles - Fixing Nuts - Test
Methods
-
R J1981 MAR2005 Road hazard Impact Test for Wheel
and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose
Vehicles)
-
J1982 AUG1998 Nomenclature - Wheels for Passenger
Cars, Light Trucks, and Multipurpose Vehicles
-
R J1986 JAN2006 Balance Weight and Rim Flange Design
Specifications, Test Procedures, and Performance Recommendations
-
J1992 MAR2001 Wheels/Rims - Military Vehicles - Test
procedures and Performance Requirements
-
J2133 JUN2001 Disc Wheel Radial Runout Low Point
Marking
-
R J2224 MAY2002 Identification of Truck, Trailer,
and Bus Wheel Seals and Associated Packaging
-
R J2283 NOV2005 Mechanical and Material Requirements
for One Piece Wheel Nuts
-
J2315 FEB1998 Wheel Nut Seat Strength
-
J2316 JAN1998 Wheel Nut Seat System Test Procedures
and Performance Requirements for Passenger Cars and Light Trucks
-
R J2475 MAR2005 Wheel End Assembly and Axle Spindle
Interface Dimensions - Truck and Bus
-
+ J2530 MAR2004 Aftermarket Wheels - Passenger Cars
and Light Truck - Performance Requirements and Test Procedures
-
J2535 MAR2001 Setting Preload in Heavy-Duty Wheel
Bearings
-
+ J2562 NOV2005 Biaxial Wheel Fatigue test
-
+ J2634 JAN2003 Scribing of Coatings in preparation
for testing of Wheels and Wheel Trim