-
2006-01-0162 Transient Behavior of R744 Vehicle Refrigeration
Cycles and the Influence of the Suction Side Accumulator Design
-
2006-01-0163 R744 HVAC-System for Supplementary Heating
- Analysis of different set-ups
-
2006-01-0164 Study on the Reduction of Fuel Consumption
in the A/C System, Which Used Variable Displacement Swash-Plate Compressor
and the performance improvment by field test
-
2006-01-0165 Electric Air Conditioning for Class 8
Tractors
-
2006-01-0166 Inverter-Integrated Electric Compressors
for Hybrid Vehicles
-
2006-01-0267 Improving Energy Efficiency in Automotive
Vapor Compression Cycles through Advanced Control Design
-
2006-01-0268 Storage Evaporators - Innovative AC Concept
for Micro Hybrid Vehicles
-
2006-01-0269 Experimental Investigation to Monitor
Vehicle Cabin Indoor Air Quality (IAQ) in Detroit Metropolitan Area
-
2006-01-0270 Recent Developments in Cabin Air Filtration
-
2006-01-0726 Numerical Modeling of Cross Flow Compact
Heat Exchanger with Louvered Fins using Thermal Resistance Concept
-
2006-01-0727 Environmentally Driven Development of
New Heat Exchanger Materials
-
2006-01-0728 New Metal-Plastic Technology for Front
End Modules
-
2006-01-1033 Cycle-Averaged Heat Flux Measurements
in a Straight-Pipe Extension of the Exhaust Port of an SI Engine
-
2006-01-1035 Development of Control system for Electrical
radiator Fan Using Dual Sensor and Microprocessor Based Electronic
Unit
-
2006-01-1036 Adaptive Control Of An Externally Controlled
Engine Cooling Fan-Drive
-
2006-01-1037 Effect of Fan Hub Configuration on the
Cooling Airflow through Electric Motors in Engine Cooling Fan Systems
-
2006-01-1038 Stator Performance for Automotive Cooling
Fans with Unsteady Inlet Conditions
-
2006-01-1040 Implementing Thermoelectrics for Media
Thermal Management in Automotive Radios
-
2006-01-1231 Comparison of Boiling Curves Between
a Standard S.I. Engine and a Flow Loop for a Mixture of Ethylene Glycol
and Water
-
2006-01-1232 Advanced Thermal Management for Internal
Combustion Engines - Valve Design, Component Testing, and Block Redesign
-
2006-01-1233 Study of the Potential of Intake Air
Heating in Automotive DI Diesel Engines
-
2006-01-1234 Multifunctional Encapsulations of the
Powertrain
-
2006-01-1235 A Metal Hydride Mobile Air Conditioning
System
-
2006-01-1449 Heat Transfer in Minichannels Tubes for
Automotive Evaporator
-
2006-01-1450 A Systematic Analysis of CO2-Reduction
by an Optimized Heat Supply During Vehicle Warm-Up
-
2006-01-1451 A Simulation and Design Tool for Flat
Tube, Louvered-Fin Heat Exchangers
-
2006-01-1452 Automotive Vapor Compression Cycles:
Validation of Control-Oriented Models
-
2006-01-1453 Optimization of Heat Sinks using a 3-level
DOE Methodology
-
2006-01-1603 An 1D-3D Integrating Numerical Simulation
for Engine Cooling Problem
-
2006-01-1604 Transient Co-Simulation of Comprehensive
Vehicle Models by Time Dependent Coupling
-
2006-01-1605 Theoretical Analysis of Waste Heat Recovery
from an Internal Combustion Engine in a Hybrid Vehicle
-
2006-01-1606 Fast Transient Simulation of Vehicle
Underhood in Heat Soak
-
2006-01-1607 Investigation of the Buoyancy Driven
Flow in a Simplified Underhood - Part II, Numerical Study
-
2006-01-1608 Investigation of the Buoyancy Driven
Flow in a Simplified Underhood - Part I, PIV and Temperature Measurements